About |
---|
Acculam® Epoxyglas G11/ FR5 -Laminate sheet comprised of flame retardant/heat resistant epoxy resin and a woven fiberglass substrate. It qualifies to NEMA FR5 and MIL-I-24678/28. This material exhibits extremely high mechanical strength at elevated temperatures. It shows good dielectric loss and electric strength properties under both dry and humid conditions. It has good chemical resistance and low moisture absorption.&& |
Product Description | |
---|---|
Generic | 环氧树脂 |
Material Status | Commercial: Active |
Features | Good Rigidity,Good Electrical Properties,Flame Characteristics,High Heat Resistance,Solvent resistance,Low moisture absorption |
Availabilitys | North America |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.85 | g/cm³ | ASTM D792 |
Water absorption rate | |||
24hr,3.18 mm | < 0.10 | % | ASTM D570 |
IMPACT | Nominal value | Unit | Test method |
---|---|---|---|
Impact strength of cantilever beam notch | ASTM D256 | ||
— | > 430 | J/m | |
— | > 530 | J/m |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Temperature index | 180 | ℃ |
Electrical performance | Nominal value | Unit | Test method |
---|---|---|---|
Relative permittivity | 4.80 | IEC 60250 | |
Dissipation factor | ASTM D150 | ||
— | 0.018 | ||
— | 0.017 | ||
breakdown voltage | |||
— | > 50000 | V | |
A | > 50000 | V |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Bond Strength | > 1.0E+6 | g |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Rockwell hardness | |||
M-level | 115 | ASTM D785 | |
bending strength | ASTM D790 | ||
— | > 276 | MPa | |
3.18 mm | > 517 | MPa | |
compressive strength | > 448 | MPa | ASTM D695 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
2. LW-E 1/150 |
3. LW-A |
4. Flatwise |
5. CW |
6. LW |
7. D24/23 |
8. A |
9. D48/50 |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |