| About |
|---|
| TOTAL Polypropylene 3480Z is formulated specifically to give excellent process stability in high profile extrusion. Low catalyst residues in TOTAL Polypropylene 3480Z provide outstanding color, plus low taste and odor. TOTAL Polypropylene 3480Z is formulated to minimize surface static build-up. TOTAL Polypropylene 3480Z complies with all applicable FDA regulations for food contact applications. TOTAL Polypropylene 3480Z is recommended for high speed profile extrusion for standard and flexible drinking straws.&& |
| Product Description | |
|---|---|
| Supplier | TOTAL |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High purity,Food contact compliance,Low odor,Antistatic property,Homopolymer |
| Availabilitys | North America |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 4.8 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 27 | J/m | ASTM D256-A |
| Notched impact strength of cantilever beam | |||
| 23℃ | 1300 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 107 | ℃ | ASTM D648 |
| Melting temperature | 166 | ℃ | DSC |
| Linear coefficient of thermal expansion | |||
| MD | 1.0E-4 | 1/℃ | ASTM D696 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 77 | ASTM D2240 | |
| Rockwell hardness | |||
| R-level | 90 | ASTM D785 | |
| Tensile modulus | 1520 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 36.5 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 10 | % | |
| fracture | 100 | % | |
| Bending modulus | 1380 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 200 to 232 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |