TECHNYL STAR® AF 60SX V30 NATURAL

About
TECHNYL STAR® AF 60SX V30 NATURAL is a high flow polyamide 66 based on a non halogenated flame retardant system, reinforced of 30% of glass fiber, for injection moulding. This product has been specifically designed to resolve the problematic of exudation and/or blooming depending on the usage of the parts. In addition, this product is a non-halogenated flame retardant grade with a complete yellow card included full RTI down to 0.8mm, 5VA @ 1.5mm and f1 rating. This product is as well easy to mould. This product offers his best benefit for all Electrical protection devices and not limited too, such as well connectic and photovoltaic application.&&

About

TECHNYL STAR® AF 60SX V30 NATURAL is a high flow polyamide 66 based on a non halogenated flame retardant system, reinforced of 30% of glass fiber, for injection moulding. This product has been specifically designed to resolve the problematic of exudation and/or blooming depending on the usage of the parts. In addition, this product is a non-halogenated flame retardant grade with a complete yellow card included full RTI down to 0.8mm, 5VA @ 1.5mm and f1 rating. This product is as well easy to mould. This product offers his best benefit for all Electrical protection devices and not limited too, such as well connectic and photovoltaic application.&&

Product Description
Supplier	DOMO
Generic	PA66
Material Status	Commercial: Negative
Features	High liquidity,Good stripping performance,Good surface appearance
Availabilitys	Europe,Africa & Middle East
Process Methods	Injection Molding

Technical Data

Process Conditions
Injection	Nominal value	Unit	Test method
drying temperature	80	°C
Recommended maximum moisture content	0.20	%
Temperature at the rear of the barrel	260 to 270	°C
Temperature in the middle of the barrel	265 to 275	°C
Front temperature of material barrel	265 to 280	°C
Mold temperature	60 to 90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.