NORDEL™ IP 3745P

About
NORDEL™ IP 3745P Hydrocarbon Rubber is a semi-crystalline, very low diene-containing ethylene-propylene-diene terpolymer (EPDM) and has a narrow molecular weight distribution. It is designed for property modification of thermoplastics such as polyethylene and polypropylene and can be used in peroxide cured rubber compounds. Main Characteristics: Semi-crystalline Very low diene Medium molecular weight and narrow molecular weight distribution Heat and UV stable Complies with: U.S. FDA 21 CFR 177.2600 U.S. FDA 21 CFR 177.1520 U.S. FDA 21 CFR 175.105 U.S. FDA 21 CFR 177.1210 EU, No 10/2011 Consult the regulations for complete details. Applications: Plastics modification such as polyethylene or polypropylene Peroxide cured moldings NOTES: (1) Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil. (2) Adhesives only.&&

About

NORDEL™ IP 3745P Hydrocarbon Rubber is a semi-crystalline, very low diene-containing ethylene-propylene-diene terpolymer (EPDM) and has a narrow molecular weight distribution. It is designed for property modification of thermoplastics such as polyethylene and polypropylene and can be used in peroxide cured rubber compounds. Main Characteristics: Semi-crystalline Very low diene Medium molecular weight and narrow molecular weight distribution Heat and UV stable Complies with: U.S. FDA 21 CFR 177.2600 U.S. FDA 21 CFR 177.1520 U.S. FDA 21 CFR 175.105 U.S. FDA 21 CFR 177.1210 EU, No 10/2011 Consult the regulations for complete details. Applications: Plastics modification such as polyethylene or polypropylene Peroxide cured moldings NOTES: (1) Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil. (2) Adhesives only.&&

Product Description
Supplier	DOW
Generic	EPDM+SEBS
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.880	g/cm³	ASTM D297
Mooney viscosity
ML 1+4，125℃	45	MU	ASTM D1646
Ethylene composition	70.0	wt%	ASTM D3900
Ethylidene norbornene content	0.5	wt%	ASTM D6047
Ash Content	< 0.1	%	ASTM D5667
molecular weight distribution	Narrow		Internal Method
Propylene content	29.5	wt%	ASTM D3900
Residual Transition Metal	< 10	ppm	Internal Method
Volatiles	< 0.40	wt%	Internal Method

Notes
1. Adhesives only.
2. Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil.
3. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.