| About |
|---|
| Product Description | |
|---|---|
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Good Hardness,Low density |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| 23℃ | 1.09 | g/cm³ | ISO 1183 |
| Volume flow rate of solution | |||
| 200℃，5.0 Kg | 3.46 | cm³/10 min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 8.02 | kJ/m² | ISO 179 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 50 mm/min | 45.54 | MPa | ISO 527 |
| Fracture, 50 mm/min | 30.24 | MPa | ISO 527 |
| Tensile strain | |||
| 50 mm/min | 22.35 | % | ISO 527 |
| bending strength | |||
| 2 mm/min | 62.12 | MPa | ISO 178 |
| Bending modulus | |||
| 2 mm/min | 2017.75 | MPa | ISO 178 |
| Rockwell hardness | |||
| R-level | 93 | ISO 2039-2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |