| About |
|---|
| Clearflex CLH D0 is a linear low density polyethylene, with antioxidants, characterised by a very low density (VLDPE). This resin is produced with a proprietary technology. Stretch films manufactured with Clearflex CLH D0 have high stretchability, outstanding clarity and very high constancy in cling effect. Main Applications Clearflex CLHD0 is recommended in all applications where outstanding flexibility and toughness are required. Its peculiar macromolecular structure, as a result of a “unique” proprietary catalyst employed, makes Clearflex CLHD0 the ideal choice for wire and cable compounding and, due to its excellent polyolefin compatibility and fillers acceptance, Clearflex CLHD0 is recommended as impact modifier of PP, with or without mineral fillers.&& |
| Product Description | |
|---|---|
| Generic | VLDPE |
| Material Status | Commercial: Negative |
| Features | Good Clarity,Food contact compliance,Inoxidizability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | |||
| Dynamic, cast thin film | > 0.50 | ISO 8295 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 23 | µm | |
| film thickness | 8 to 50 µm | ||
| Tensile modulus | ISO 527-3 | ||
| 1% secant, MD, 23 µ m, cast thin film | 40.0 | MPa | ISO 527-3 |
| 1% secant, TD, 23 µ m, cast thin film | 50.0 | MPa | ISO 527-3 |
| tensile strength | ISO 527-3 | ||
| MD, yield, 23 µ m, blow molded film | 5.00 | MPa | ISO 527-3 |
| TD, yield, 23 µ m, blow molded film | 5.00 | MPa | ISO 527-3 |
| MD, fracture, 23 µ m, blow molded film | 31.0 | MPa | ISO 527-3 |
| TD, fracture, 23 µ m, blow molded film | 26.0 | MPa | ISO 527-3 |
| Tensile strain | ISO 527-3 | ||
| MD, fracture, 23 µ m, cast thin film | 600 | % | ISO 527-3 |
| TD, fracture, 23 µ m, cast thin film | 800 | % | ISO 527-3 |
| Drop hammer impact | |||
| 23 µ m, cast thin film | 230 | g | ISO 7765-1/A |
| tear strength | ISO 6383-2 | ||
| MD，23 µm | 40.0 | kN/m | ISO 6383-2 |
| TD，23 µm | 82.0 | kN/m | ISO 6383-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -70.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 62.0 | ℃ | ISO 306/A |
| Melting temperature | 105 | ℃ | Internal Method |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45 °, 23 µ m, cast thin film | 90 | ASTM D2457 | |
| Haze | |||
| 23 µ m, cast thin film | 1.0 | % | ISO 14782 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 220 to 270 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Cast Film |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |