| About |
|---|
| IROGRAN CA116-201 is a high performance polyester based thermoplastic polyurethane intended for flat die extrusion applications. IROGRAN CA116-201 is part of the HUNTSMAN film and sheet product range and offers a specially designed, flexible plasticizer free product suitable for the preparation of extruded films. PERFORMANCE FEATURES Low melt temperature High crystallization rate Good low temperature flexibility Good processability APPLICATIONS Adhesive film Lamination&& |
| Product Description | |
|---|---|
| Supplier | Huntsman |
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Low temperature toughness |
| Availabilitys | North America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，5.0kg | 15 | g/10min | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Fracture, 0.635 mm | 24.8 | MPa | ASTM D412 |
| Fracture, 0.635 mm | 33.0 | MPa | DIN 53504 |
| 300% strain, 0.635 mm | 6.86 | MPa | ASTM D412 |
| 100% strain, 0.635 mm | 6.07 | MPa | ASTM D412 |
| Tensile strain | |||
| Fracture, 0.635 mm | 600 | % | ASTM D412 |
| Fracture, 0.635 mm | 400 | % | DIN 53504 |
| tear strength | |||
| 6.35 mm | 75 | kN/m | DIN 53515 |
| 0.635 mm | 92.8 | kN/m | ASTM D624 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw A, injection molding | 95 | ASTM D2240 | |
| injection molding | 95 | DIN 53505 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 80.0 to 150 | ℃ | |
| TMA（635.0 µm） | 90 to 120 | ℃ | Internal Method |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 4 | °C | |
| Drying time | 4.0 | hr | |
| Hopper temperature | 160 | °C | |
| Barrel 1 zone temperature | 170 | °C | |
| Barrel 2 zone temperature | 170 | °C | |
| Barrel 3 zone temperature | 170 | °C | |
| Barrel 4 zone temperature | 170 | °C | |
| Barrel 5 zone temperature | 170 | °C | |
| Connector temperature | 170 | °C | |
| Nozzle temperature | 170 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Injection Molded |
| 3. Extruded Film |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |