Lupolen 5031 L Q 449 K

About
Lupolen 5031 L Q 449 K is a high density polyethylene (HDPE) base material for extrusion of silane crosslinked pipes (PE-Xb). It is not intended for medical and pharmaceutical applications.&&

Product Description
Supplier	LyondellBasell
Generic	HDPE
Material Status	Commercial: Active
Features	Crosslinked
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.955	g/cm³	ISO 1183
Melt Flow Rate			ISO 1133
190℃，2.16kg	4.0	g/10min
190℃，5.0kg	13	g/10min

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	5.0	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
A50	125	℃	ISO 306/A50
B50	70.0	℃	ISO 306
Melting temperature
DSC	131	℃	ISO 3146

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore D, 3 seconds	62		ISO 868
Ball hardness
H 132/30	50.0	MPa	ISO 2039-1
Tensile modulus
Secant, 23 ℃	1100	MPa	ISO 527-1-2
tensile strength
Yield, 23 ℃	26.0	MPa	ISO 527-2/50
Tensile strain
Yield, 23 ℃	10	%	ISO 527-2/50

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	< 280	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.