Silopren® Gel 6209FC

About
Silopren Gel 6209FC is a kit matched easily pourable, solvent free, clear and colourless two-component silicone gel. After mixing the A and the B part at a mix ratio of 1:1 the material cures very fast at room temperature by an addition reaction to a tacky silicone gel with excellent vibration dampening properties. Key Features and Benefits Convenient 1: 1 mixing by weight Low viscosity, free of solvents Fast room temperature cure Soft, tacky gel, sticking to many substrates Mechanical shock and vibration damping properties Useful temperature range -50°C to 150 °C Potential Applications Silopren Gel 6209FC is specially developed for electronic potting applications such as hybrid IC insulation, potting of power modules and sensors when fast cure at room temperature is required.&&

About

Silopren Gel 6209FC is a kit matched easily pourable, solvent free, clear and colourless two-component silicone gel. After mixing the A and the B part at a mix ratio of 1:1 the material cures very fast at room temperature by an addition reaction to a tacky silicone gel with excellent vibration dampening properties. Key Features and Benefits Convenient 1: 1 mixing by weight Low viscosity, free of solvents Fast room temperature cure Soft, tacky gel, sticking to many substrates Mechanical shock and vibration damping properties Useful temperature range -50°C to 150 °C Potential Applications Silopren Gel 6209FC is specially developed for electronic potting applications such as hybrid IC insulation, potting of power modules and sensors when fast cure at room temperature is required.&&

Product Description
Supplier	Momentive
Generic	硅凝胶
Material Status	Commercial: Active
Features	Low Viscosity,noise reduction,Soft,Fast Cure
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.980	g/cm³

Electrical performance	Nominal value	Unit
Volume resistivity	2.0E+15	ohms·cm
Dielectric strength	20	kV/mm
Dielectric constant
60 Hz	2.80
Dissipation factor
60 Hz	1.0E-3
Compared to the leakage tracing index	> 600	V

optical performance	Nominal value	Unit	Test method
Refractive index	1.410

Uncured Properties	Nominal value	Unit
colour
—	Clear/Transparent
Density
—	0.980	g/cm³
viscosity
—	1.0	Pa·s
storage stability
23℃	30	min

THERMAL	Nominal value	Unit
Linear coefficient of thermal expansion
MD	3.0E-4	1/℃
Thermal conductivity coefficient	0.17	W/m/K
Thermosetting components
Component A	按重量计算的混合比: 1.0
Component B	按重量计算的混合比: 1.0

Notes
1. Typical properties: these are not to be construed as specifications.
2. Part B
3. Part A
4. Mixed
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.