MAZMID B 150 FV 10

About
MAZMID B 150 FV 10 is a Polyamide 6 (Nylon 6) product filled with 10% glass fiber. It can be processed by injection molding and is available in Latin America. Applications of MAZMID B 150 FV 10 include electrical/electronic applications, engineering/industrial parts, automotive and housings. Characteristics include: Flame Rated Good Aesthetics Good Dimensional Stability Heat Resistant High Stiffness&&

About

MAZMID B 150 FV 10 is a Polyamide 6 (Nylon 6) product filled with 10% glass fiber. It can be processed by injection molding and is available in Latin America. Applications of MAZMID B 150 FV 10 include electrical/electronic applications, engineering/industrial parts, automotive and housings. Characteristics include: Flame Rated Good Aesthetics Good Dimensional Stability Heat Resistant High Stiffness&&

Product Description
Generic	PA6
Material Status	Commercial: Active
Features	Good wear resistance,Antistatic property,HB
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ASTM D792
Shrinkage rate
MD	0.85 to 1.0	%	ASTM D955
Water absorption rate
23℃，24hr	1.3	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	70	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	190	℃	ASTM D648
1.8 MPa, unannealed	150	℃	ASTM D648
Continuous use temperature	85.0 to 90.0	℃
Melting temperature	214 to 220	℃
Linear coefficient of thermal expansion
MD	3.0E-5	1/℃	ASTM D696

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+15	ohms·cm	ASTM D257
Dielectric strength	21	kV/mm	ASTM D149

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	122		ASTM D785
Tensile modulus	5000	MPa	ASTM D638
tensile strength	100	MPa	ASTM D638
Tensile strain
fracture	6.0	%	ASTM D638
Bending modulus	4500	MPa	ASTM D790
bending strength	160	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.