AMPLIFY™ TY 1060H

About
AMPLIFY™ 1060H Functional Polymer is a maleic anhydride grafted (MAH) polymer concentrate designed as a blend component for unmodified polyethylene and polypropylene. In tie layers for flexible packaging, AMPLIFY TY 1060H promotes adhesion of polyethylene and polypropylene to barrier polymers such as polyamide and ethylene vinyl alcohol (EVOH). The functionality of this polymer also promotes adhesion between metal, polyolefins, cellulose, polyester, polycarbonate, glass, and foil. For linear low density polyethylene film structures: Typical blend addition level is 20-25% for EVOH and 10-25% for polyamide. For polypropylene film structures: Optimal adhesion performance is obtained when using a polypropylene dilution resin with an MFR of less than 3.0 (230 °C/2.16 kg). Typical blend addition level is 20-25% for EVOH and 10-25% for polyamide. Main Characteristics: Adhesive concentrate for use in blown, cast, and coating applications Tie layer for food packaging and pipe coating Adhesive layer in multi-layer flexible film applications Polymer compatibilizer Low gels Complies with: U.S. FDA 21 CFR 175.105 EU, No 10/2011 Consult the regulations for complete details.&&

About

AMPLIFY™ 1060H Functional Polymer is a maleic anhydride grafted (MAH) polymer concentrate designed as a blend component for unmodified polyethylene and polypropylene. In tie layers for flexible packaging, AMPLIFY TY 1060H promotes adhesion of polyethylene and polypropylene to barrier polymers such as polyamide and ethylene vinyl alcohol (EVOH). The functionality of this polymer also promotes adhesion between metal, polyolefins, cellulose, polyester, polycarbonate, glass, and foil. For linear low density polyethylene film structures: Typical blend addition level is 20-25% for EVOH and 10-25% for polyamide. For polypropylene film structures: Optimal adhesion performance is obtained when using a polypropylene dilution resin with an MFR of less than 3.0 (230 °C/2.16 kg). Typical blend addition level is 20-25% for EVOH and 10-25% for polyamide. Main Characteristics: Adhesive concentrate for use in blown, cast, and coating applications Tie layer for food packaging and pipe coating Adhesive layer in multi-layer flexible film applications Polymer compatibilizer Low gels Complies with: U.S. FDA 21 CFR 175.105 EU, No 10/2011 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	马来酸酐接枝共聚物
Material Status	Commercial: Negative
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.870	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	3.0	g/10min	ASTM D1238，ISO 1133
MAH grafting level	High		Internal Method

MECHANICAL	Nominal value	Test method
Shore hardness		ASTM D2240 , ISO 868
Shaw’s A	77	ASTM D2240 , ISO 868
Shaw’s D	21	ASTM D2240 , ISO 868

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	40.0	℃	ASTM D1525 , ISO 306
Melting temperature
DSC	62.8	℃	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
2. Low: <0.25 wt%, Medium 0.25-0.5, High >0.5 wt%, Very High >1.0 wt%.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.