| About |
|---|
| Favorite LL565 is a Linear Low Density Polyethylene + EVA product. It is available in North America. Typical application: Bags/Liners.&& |
| Product Description | |
|---|---|
| Generic | LLDPE+EVA |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.929 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | 0.88 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | |||
| With oneself – static | 0.21 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 38 | µm | |
| tensile strength | ASTM D882 | ||
| MD, fracture | 26.7 | MPa | ASTM D882 |
| TD, fracture | 23.9 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture | 540 | % | ASTM D882 |
| TD, fracture | 1100 | % | ASTM D882 |
| Drop hammer impact | 170 | g | ASTM D1709 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 64 | ASTM D2457 | |
| Haze | 7.5 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |