| About |
|---|
| Geon™ Vinyl Rigid Extrusion 8700A is a Rigid Polyvinyl Chloride product. It can be processed by extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Geon™ Vinyl Rigid Extrusion 8700A include automotive and plumbing/piping/potable water. Characteristics include: Flame Rated Good Dimensional Stability&& |
| Product Description | |
|---|---|
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,V-0,5VA,Good melt strength |
| Availabilitys | Latin America,North America,Africa & Middle East ,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.38 | g/cm³ | ASTM D792 |
| PVC unit classification | 16344 | ASTM D1784 | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256A | ||
| -18 ℃, 3.2mm, molded | 59 | J/m | ASTM D256-A |
| 0 ℃, 3.2mm, molded | 85 | J/m | ASTM D256-A |
| 23 ℃, 3.2mm, molded | 910 | J/m | ASTM D256-A |
| Falling impact resistance | ASTM D4226 | ||
| 23℃ | 35.6 | J/cm | ASTM D4226 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 3.2 mm | 72.8 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 6.7E-5 | 1/℃ | ASTM D696 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 27 | kV/mm | ASTM D149 |
| Dielectric constant | ASTM D150 | ||
| 60 Hz | 3.90 | ASTM D150 | |
| 1 kHz | 3.30 | ASTM D150 | |
| Dissipation factor | ASTM D150 | ||
| 30℃，60 Hz | 0.029 | ASTM D150 | |
| 30℃，1 kHz | 0.040 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 0.71 mm, all colors | V-0 | UL 94 | |
| 1.50 mm, all colors | 5VA | UL 94 | |
| CSA flame retardant rating (870.0 µ m) | V-0 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Ease of sizing | 极好 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 15 seconds | 78 | ASTM D2240 | |
| Rockwell hardness | |||
| R-level | 111 | ASTM D785 | |
| Tensile modulus | 2690 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 42.7 | MPa | ASTM D638 |
| Bending modulus | 2620 | MPa | ASTM D790 |
| bending strength | 75.8 | MPa | ASTM D790 |
| compressive strength | 55.8 | MPa | ASTM D695 |
| Process Conditions | |||
|---|---|---|---|
| extrusion | Nominal value | Unit | Test method |
| Melt Temperature | 179 to 182 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type I, 0.20 in/min |
| 3. Procedure A, C.125 Dart |
| 4. Procedure B, C.125 Dart |
| 5. 24 hr |
| 6. All Colors |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |