| About |
|---|
| Boltaron Rigiwall® 4333W is a proprietary, calendered Acrylic/PVC Alloy sheet, designed as a UV resistant, durable, protective wall covering for patio enclosures. Boltaron Rigiwall® 4333W offers a class 1-A building code rating, excellent impact strength, abrasion resistance, and stain and chemical resistance. Boltaron 4333W is corona treated on the back side for improved adhesion. Colors: Light colors Gauges: .022 to .040 Widths: Up to 60″ Lengths: Up to 120″ Custom Sizes: Upon request Textures: Matte/Matte Sandcastle Haircell Scratch Resistant Abrasion Resistant&& |
| Product Description | |
|---|---|
| Generic | PMMA+PVC |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,The fouling resistance,High impact resistance,Good bond,Good wear resistance,Durability,Solvent resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.37 | g/cm³ | ASTM D792 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Water vapor transmittance | ASTM E96 | ||
| PRO B | 0.0800 | US perms | ASTM E96 |
| PRO BW | 0.130 | US perms | ASTM E96 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 530 to 800 | J/m | ASTM D256 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Heat Aging – Color Change L * a * b | |||
| 70℃ | 0.400 | ||
| 70℃ | 0.600 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 73.9 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 9.0E-5 | 1/℃ | ASTM D696 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| flame propagation | ASTM E84 | ||
| < 635.0 µm | 10.0 | ASTM E84 | |
| < 736.6 µm | 15.0 | ASTM E84 | |
| < 1.09 mm | 15.0 | ASTM E84 | |
| < 1.63 mm | 15.0 | ASTM E84 | |
| Smoke Developed | ASTM E84 | ||
| < 635.0 µm | 30.0 | ASTM E84 | |
| < 1.09 mm | 60.0 | ASTM E84 | |
| < 1.63 mm | 200 | ASTM E84 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| dimensional stability | |||
| 230℃，152.40 cm | 13 | % | |
| 24 hr：70℃ | 1.0 | % | |
| 7 days：70℃ | 1.0 | % |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 106 | ASTM D785 | |
| tensile strength | |||
| yield | 35.9 | MPa | ASTM D638 |
| Bending modulus | 2000 | MPa | ASTM D790 |
| bending strength | |||
| yield | 57.2 | MPa | ASTM D790 |
| Taber abraser | |||
| 1000 cycles, 1000 g, CS-17 wheels | 0.0730 | mg | ASTM D1044 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 7 days |
| 3. 24 hrs |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |