Jampilen EP448S

About
Jampilen EP448S is a high melt flow rate, heterophasic copolymer for thin-walled injection molding. Items made with this grade exhibit high stiffness, good impact resistance and excellent antistatic properties. The use of Jampilen EP448S allows high productivity because of the easy mould filling and short cycle times. The excellent balance of mechanical properties combined with the outstanding organoleptic properties and antistatic characteristics make this grade particularly suitable for thin-wailed packaging. Jampilen EP448S is suitable for food contact.&&

About

Jampilen EP448S is a high melt flow rate, heterophasic copolymer for thin-walled injection molding. Items made with this grade exhibit high stiffness, good impact resistance and excellent antistatic properties. The use of Jampilen EP448S allows high productivity because of the easy mould filling and short cycle times. The excellent balance of mechanical properties combined with the outstanding organoleptic properties and antistatic characteristics make this grade particularly suitable for thin-wailed packaging. Jampilen EP448S is suitable for food contact.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,High liquidity,Quick molding cycle,Food contact compliance,Good sensory characteristics.,Copolymer,Antistatic property
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	40	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	30	J/m
23℃	65	J/m

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	108	℃	ASTM D648
Vicat Softening Temp	150	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	95		ASTM D785
tensile strength
yield	27.0	MPa	ASTM D638
Tensile strain
yield	6.0	%	ASTM D638
Bending modulus	1300	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.