| About |
|---|
| EXCELLEN® GMH GH030 Applications: For sealant film, greenhouse film, sheet, shoe sole, tube, pipe, etc. Characteristics: High mechanical strength, impact resistance, easy processing, seal strength, high speed processing. GH030 is additives free.&&EXCELLEN® GMH GH030 EXCELLEN® GMH GH030 is a Metallocene Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application of EXCELLEN® GMH GH030: Agricultural&& |
| Product Description | |
|---|---|
| Supplier | Sumitomo |
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,High impact resistance,Quick molding cycle |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.912 | g/cm³ | JIS K7112 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.50 | g/10min | JIS K6922-1 |
| ESCR(Environmental Stress Cracking Resistance) | > 1000 | hr | JIS K6760-1981 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | Internal Method | ||
| 1% secant, MD | 110 | MPa | Internal Method |
| 1% secant, TD | 130 | MPa | Internal Method |
| tensile strength | JIS K6781 | ||
| fracture | 30.0 | MPa | JIS K7113 |
| MD, fracture | 32.0 | MPa | JIS K6781 |
| TD, fracture | 34.0 | MPa | JIS K6781 |
| Tensile strain | JIS K6781 | ||
| fracture | 850 | % | JIS K7113 |
| MD, fracture | 550 | % | JIS K6781 |
| TD, fracture | 710 | % | JIS K6781 |
| Drop hammer impact | 74 | g | ASTM D1709-A |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile impact strength | 1160 | kJ/m² | ASTM D1822 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 90.0 | ℃ | JIS K7206 2 |
| Melting temperature | 102 | ℃ | DSC |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 115 | JIS K7105 | |
| Haze | 4.0 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 49 | JIS K7215 | |
| Bending modulus | 130 | MPa | ASTM D747-70 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Nozzle temperature | 150 to 170 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |