Advance™ 150

About
Advance™ 150 Polypropylene Resin is a clarified random copolymer designed for the blow moulding of high gloss bottles and film & sheet extrusion. Containers produced from Advance 150 exhibit good surface finish and excellent contact clarity. Advance™ 150 also contains a UV absorber for improved light stability. Typical Applications Toiletry containers Petroleum Jelly jars High clarity bottles Thermoforming Film for retort applications&&

About

Advance™ 150 Polypropylene Resin is a clarified random copolymer designed for the blow moulding of high gloss bottles and film & sheet extrusion. Containers produced from Advance 150 exhibit good surface finish and excellent contact clarity. Advance™ 150 also contains a UV absorber for improved light stability. Typical Applications Toiletry containers Petroleum Jelly jars High clarity bottles Thermoforming Film for retort applications&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Weather resistance is good,Good Clarity,Good surface appearance,Ultraviolet absorption,Food contact compliance,Random copolymer
Availabilitys	Africa & Middle East

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	1.5	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, injection molding	29.0	MPa	ISO 527-2
Tensile strain
Yield, injection molding	11	%	ISO 527-2
Bending modulus
injection molding	1000	MPa	ISO 178

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
0 ℃, injection molding	3.0	kJ/m²
23 ℃, injection molding	11	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	70.0	℃	ISO 75-2/B
1.8 MPa, unannealed	49.0	℃	ISO 75-2/A
Vicat Softening Temp
—	133	℃	ISO 306/A
—	73.0	℃	ISO 306/B

optical performance	Nominal value	Unit	Test method
Transmittance
injection molding	84.0	%	ASTM D1003

Supplementary information	Nominal value	Unit
Blow molding mold temperature	220	℃
Blowing molding temperature
Zone	180 to 200	℃
Zone	210 to 230	℃
Zone	230 to 250	℃
Zone	220 to 240	℃

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	190	°C
Barrel 2 zone temperature	230	°C
Barrel 3 zone temperature	250	°C
Barrel 4 zone temperature	250	°C
Nozzle temperature	245	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.