| About |
|---|
| F676H is a medium molecular weight PVC homopolymer suitable for flexible applications and is exceptionally low in gels and finds wide acceptance in calendered film, sheeting and blow molding. Suggested Applications: Calendering, Blown Flexible Films, Wire Insulation and Meat Wrap.&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Features | Good flexibility,Low speed solidification point,Homopolymer |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.52 | g/cm³ | ASTM D1895 |
| K-Value | 68.0 | ||
| pollutant | 20 | ||
| Particle size distribution | ASTM D1921 | ||
| 200 Mesh | 4.0 | % | ASTM D1921 |
| 40 Mesh | 100 | % | ASTM D1921 |
| Intrinsic viscosity | 0.95 | ASTM D1243 | |
| Relative viscosity | 2.27 | ASTM D1243 | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Gel Count | 10.0 | Internal Method | |
| Residual Vinyl Chloride Monomer | < 1 | ppm | Internal Method |
| volatility | 0.20 | % | ASTM D3030 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. OCS per 100g |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |