Fusabond® M623XF

About
Fusabond® M623XF resin is a random ethylene copolymer, incorporating a monomer which is classified as being a maleic anhydride equivalent for application uses. The exact composition is considered to be proprietary information. Applications: Fusabond® M623XF is used as a modifier to be included in hot melt formulations for enhancing the performance of hot melt adhesives. It is miscible with EVA and Ethylene acrylic ester copolymers: It is best used when incorporated in hot melt formulations of EVA or Ethylene acrylic ester copolymers for enhancing and expanding adhesion performance. Because of its high fluidity and higher melting point, it may also impart processing and handling benefits for hot melt formulations. Fusabond® M623XF can also be dispersed in latex form, or ground into powder form, for other process applications, and end uses. Applications include but are not limited to: Adhesives, Polymer Modification, Coupling agent, Powder coating&&

About

Fusabond® M623XF resin is a random ethylene copolymer, incorporating a monomer which is classified as being a maleic anhydride equivalent for application uses. The exact composition is considered to be proprietary information. Applications: Fusabond® M623XF is used as a modifier to be included in hot melt formulations for enhancing the performance of hot melt adhesives. It is miscible with EVA and Ethylene acrylic ester copolymers: It is best used when incorporated in hot melt formulations of EVA or Ethylene acrylic ester copolymers for enhancing and expanding adhesion performance. Because of its high fluidity and higher melting point, it may also impart processing and handling benefits for hot melt formulations. Fusabond® M623XF can also be dispersed in latex form, or ground into powder form, for other process applications, and end uses. Applications include but are not limited to: Adhesives, Polymer Modification, Coupling agent, Powder coating&&

Product Description
Supplier	DOW
Generic	PE copolymerization
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ASTM D792
Density	0.940	g/cm³	ISO 1183
Melt Flow Rate			ASTM D1238
120℃，2.16kg	60	g/10min	ASTM D1238
190℃，2.16kg	400	g/10min	ASTM D1238
Melt Flow Rate			ISO 1133
120℃，2.16kg	60	g/10min	ISO 1133
190℃，2.16kg	400	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Melting temperature
DSC
—	100	℃	ASTM D3418
—	100	℃	ISO 3146
Freezing point – DSC
—	80	℃	ISO 3146
—	80	℃	ASTM D3418

Supplementary information	Nominal value	Unit	Test method
Processing temperature	< 235	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.