Trademark PE LDVA1925.4B

About
Trademark PE LDVA1925.4B is a Low Density Polyethylene + EVA product. It can be processed by coextruded film and is available in North America. Applications of Trademark PE LDVA1925.4B include bags/liners, film and food contact applications. Characteristics include: Clarity Food Contact Acceptable Good Sealability High Strength Impact Resistant&&

Product Description
Generic	LDPE+EVA
Material Status	Commercial: Active
Features	Good Clarity,Good heat sealing,High impact resistance,Food contact compliance,Low temperature strength
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.925	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	1.0	g/10min	ASTM D1238
Vinyl acetate content	4.0	wt%

film	Nominal value	Unit	Test method
film thickness
test	38	µm
tensile strength			ASTM D882
MD, fracture, 38 µ m, blow molded film	25.2	MPa	ASTM D882
TD, fracture, 38 µ m, blow molded film	21.7	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture, 38 µ m, blow molded film	350	%	ASTM D882
TD, fracture, 38 µ m, blow molded film	510	%	ASTM D882
Drop hammer impact
38 µ m, blow molded film	150	g	ASTM D1709
Elmandorf tear strength			ASTM D1922
MD: 38 µ m, blow molded film	190	g	ASTM D1922
TD: 38 µ m, blow molded film	260	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
gloss
45 °, 38.1 µ m, blow molded film	75		ASTM D2457
Haze
38.1 µ m, blow molded film	4.5	%	ASTM D1003

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	166 to 193	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.