| About |
|---|
| Kynar® resins are fluorinated thermoplastic homopolymers. Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-mechanical properties. Main applications: Battery, membrane&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | Good flexibility,High Viscosity |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shaw’s D | 76 to 80 | ASTM D2240 | |
| tensile strength | |||
| fracture | 34.0 to 43.0 | MPa | ASTM D638 |
| yield | 40.0 to 55.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 50 to 250 | % | ASTM D638 |
| Bending modulus | 1360 to 2210 | MPa | ASTM D790 |
| bending strength | 48.0 to 62.0 | MPa | ASTM D790 |
| compressive strength | 68.0 to 103 | MPa | ASTM D695 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting peak temperature | 162 to 172 | ℃ | ASTM D3418 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.77 to 1.79 | g/cm³ | ASTM D792 |
| Apparent viscosity of melt | |||
| 230℃，100 sec^-1 | 4450 to 5450 | Pa·s | ASTM D3835 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |