| About |
|---|
| HTM® 512 series tooling prepregs are bismaleimide (BMI) systems specifically formulated for the manufacture composite tooling operating at high temperatures. After full post-cure, HTM512 series tooling prepregs demonstrate resistance to thermal cycling up to 250°C (482°F).&& |
| Product Description | |
|---|---|
| Supplier | Cytec Industries |
| Generic | 马来酸酐接枝共聚物 |
| Material Status | Commercial: Active |
| Features | High liquidity,High Heat Resistance,High pressure heat resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.25 | g/cm³ | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | |||
| MD | 2.9E-6 | 1/℃ |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |