EMAC® SA2413 - SOLIAO

About
Westlake EMAC® SA2413 is an ethylene methyl acrylate copolymer with 16.5% MA designed for blown film. The high slip and antiblock loading in SA2413 provides for easier handling of films and the low C.O.F. needed in many applications. The high compatibility of this resin makes it ideal as an impact modifier and compatibilizer. Application/Uses Medical films Flexible packaging Seal layer Quiet films, batch inclusion films Compatibilizer, impact modifier Key Attributes Good adhesion to or compatibility with various polymers Good heat and RF sealing High slip and antiblock for low C.O.F. Soft, flexible, tough without plasticizers&&

About

Westlake EMAC® SA2413 is an ethylene methyl acrylate copolymer with 16.5% MA designed for blown film. The high slip and antiblock loading in SA2413 provides for easier handling of films and the low C.O.F. needed in many applications. The high compatibility of this resin makes it ideal as an impact modifier and compatibilizer. Application/Uses Medical films Flexible packaging Seal layer Quiet films, batch inclusion films Compatibilizer, impact modifier Key Attributes Good adhesion to or compatibility with various polymers Good heat and RF sealing High slip and antiblock for low C.O.F. Soft, flexible, tough without plasticizers&&

Product Description
Supplier	Westlake Chemical
Generic	EMA
Material Status	Commercial: Negative
Features	Smoothness,Low coefficient of friction,High anti-blocking,Good bond,Soft
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.60	g/10min	ASTM D1238
Methacrylic acid content	16.5	wt%

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	40		ASTM D2240

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -72.8	℃	ASTM D746
Vicat Softening Temp	62.8	℃	ASTM D1525
Melting peak temperature	88.9	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.