Adstif HA5029 - SOLIAO

About
Adstif HA5029 “Adstif” HA5029 is high crystallinity polypropylene homopolymer, which features an extremely high stiffness, high flow ability than current Homo portfolio. In addition, “Adstif” HA5029 shows high gloss and maintaining mechanical properties even at high temperatures. “Adstif” HA5029 is typically used by customers for automotive interior trim applications.&&Adstif HA5029 Adstif HA5029 is a high crystallinity polypropylene homopolymer wth extremely high stiffness, high flowability, high gloss, high HDT, and has long term heat resistance. Typical customer applications are parts for electrical appliances such as electric kettle, coffee maker, electric fan housing, and also for TWIM and food containers. It is also used by customers for parts of automotive interior trim.&&

About

Adstif HA5029 “Adstif” HA5029 is high crystallinity polypropylene homopolymer, which features an extremely high stiffness, high flow ability than current Homo portfolio. In addition, “Adstif” HA5029 shows high gloss and maintaining mechanical properties even at high temperatures. “Adstif” HA5029 is typically used by customers for automotive interior trim applications.&&Adstif HA5029 Adstif HA5029 is a high crystallinity polypropylene homopolymer wth extremely high stiffness, high flowability, high gloss, high HDT, and has long term heat resistance. Typical customer applications are parts for electrical appliances such as electric kettle, coffee maker, electric fan housing, and also for TWIM and food containers. It is also used by customers for parts of automotive interior trim.&&

Product Description
Supplier	LyondellBasell
Generic	HC PP
Material Status	Commercial: Active
Features	Good Rigidity,Good surface appearance,High liquidity,High Heat Resistance,High crystallization,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	65	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	20	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	140	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	117		ASTM D785
tensile strength
yield	40.2	MPa	ASTM D638
Tensile strain
yield	6.0	%	ASTM D638
Bending modulus	2160	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.