ADMER™ QF825E

About
ADMER™ QF825E is a PP-based adhesive designed for aluminum coating application.&&

Product Description
Supplier	Mitsui
Generic	MAH-g-PP增容剂
Material Status	Commercial: Active
Features	Food contact compliance,Good bond
Availabilitys	Africa & Middle East ,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.906	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	23	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam	0.0370	kJ/m²	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	138	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	66		ASTM D2240
tensile strength
yield	28.0	MPa
fracture	18.0	MPa
Tensile strain
fracture	37	%	ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.