| About |
|---|
| The VisiJet® line of materials offers numerous capabilities to meet a variety of commercial applications. Using the ColorJet Printing (CJP) technology, 3D Systems’ ProJet® x60 3D Printers use the VisiJet® PXL™ material set to build strong, high-definition, full color concept models, assemblies and prototypes, for design realization, advanced communication, as well as development and production cost reduction. Printed models benefit transportation, energy, consumer products, recreation, healthcare, education and other vertical markets. Parts can be sanded, drilled, tapped, painted and electroplated, which further expands the options available for finished part characteristics. Additionally, models have high-temperature resistance, ideal for digital manufacturing and molding applications. Our premium composite for the ProJet x60 product line, VisiJet PXL delivers the best of everything: Toughest parts Best resolution Whitest whites Excellent color accuracy Low cost per printed part&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Heat Resistance, Good |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile modulus | |||
| — | 12900 | MPa | |
| — | 12600 | MPa | |
| — | 9450 | MPa | |
| tensile strength | |||
| — | 2.38 | MPa | |
| — | 26.4 | MPa | |
| — | 14.2 | MPa | |
| Tensile strain | |||
| fracture | 0.040 | % | |
| fracture | 0.21 | % | |
| fracture | 0.23 | % | |
| Bending modulus | |||
| — | 6360 | MPa | |
| — | 10700 | MPa | |
| — | 7160 | MPa | |
| bending strength | |||
| — | 13.1 | MPa | |
| — | 44.1 | MPa | |
| — | 31.1 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Using ColorBond™ Infiltrant: Instant-cure infiltrant ideal for color models to improve strength and color vibrancy and retention. |
| 3. Using StrengthMax™ Infiltrant: Two-part infiltrant ideal for functional models to dramatically improve the strength of the model. |
| 4. Using Salt Water Cure™ Infiltrant: Eco-friendly and hazard-free infiltrant. Ideal for monochrome models and draft- color. Provides additional surface hardness and modulus upon dipping, or spraying. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |