Daploy™ WB130HMS

About
Daploy WB130HMS is a propylene-based, structurally isomeric polymer. Applications: Thermoformable, foamed films and sheets Lightweight packaging trays, beakers and containers Microwaveable food packaging Technical foams for automotive applications such as headliners, carpet backing Door liners Parcel shelves Water shields Thermal and acoustic insulation Under the hood acoustic panels Cushioning and protective packaging Special features: Daploy WB130HMS is optimised to deliver: Improved processability High stiffness High service temperature Foamability in foam extrusion processes Good insulation properties of foamed materials&&

About

Daploy WB130HMS is a propylene-based, structurally isomeric polymer. Applications: Thermoformable, foamed films and sheets Lightweight packaging trays, beakers and containers Microwaveable food packaging Technical foams for automotive applications such as headliners, carpet backing Door liners Parcel shelves Water shields Thermal and acoustic insulation Under the hood acoustic panels Cushioning and protective packaging Special features: Daploy WB130HMS is optimised to deliver: Improved processability High stiffness High service temperature Foamability in foam extrusion processes Good insulation properties of foamed materials&&

Product Description
Supplier	Borealis AG
Generic	HMS PP
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Renewable resources,Foaming performance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	2.0	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
injection molding	2000	MPa	ISO 527-2
tensile strength
Yield, injection molding	40.0	MPa	ISO 527-2
Bending modulus
injection molding	1900	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	1.0	kJ/m²	ISO 179/1eA
23℃	3.0	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	60.0	℃	ISO 75-2/A
0.45 MPa, unannealed	110	℃	ISO 75-2/B

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.