Asaflex™ 830

About
Film and sheet extrusion grade. Blended with SC, for films with good balance of performance characteristics. Capability for inflation and sheet extrusion. It is supplied in pellet form. In blends with GPPS, for IC carrier tapes. In blends with SC, for shrink films. Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 830 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS (general-purpose polystyrene).&&

About

Film and sheet extrusion grade. Blended with SC*, for films with good balance of performance characteristics. Capability for inflation and sheet extrusion. It is supplied in pellet form. In blends with GPPS, for IC carrier tapes. In blends with SC, for shrink films. * Styrenic copolymer from PS Japan Corp. similar to Asaflex™ 830 in refraction index, resulting in blends that provide sheet transparency significantly higher than attainable with any GPPS (general-purpose polystyrene).&&

Product Description
Supplier	Asahi Kasei
Generic	SBS
Material Status	Commercial: Active
Features	Copolymer
Availabilitys	Asia Pacific,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.01	g/cm³	ISO 1183
Melt Flow Rate
200℃，5.0kg	5.0	g/10min	ISO 1133
Shrinkage rate	0.20 to 0.80	%
Water absorption rate
23℃，24hr	0.10	%	ISO 62

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
Local fracture	15	kJ/m²	ISO 179
Charpy Unnotch Impact strength	无断裂		ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	60.0	℃	ISO 75-2/A
Vicat Softening Temp
A50	72.0	℃	ISO 306/A50

optical performance	Nominal value	Unit	Test method
Transmittance
2000 µm	89.0	%	ISO 3537
Haze
2000 µm	2.0	%	ISO 3537

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	55		ISO 868
Rockwell hardness
R-level	10		ISO 2039-2
tensile strength
yield	18.0	MPa	ISO 527-2/5
Tensile strain
fracture	250	%	ISO 527-2/5
Bending modulus	1100	MPa	ISO 178
bending strength	21.0	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.