Pro-fax PF531 - SOLIAO

About
Pro-fax PF531 radiation resistant, high melt flow, controlled rheology polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications and offers retention of physical properties and color after radiation sterilization and good processability. Pro-fax PF531 resists yellowing and embrittlement after gamma radiation. However, since performance and appearance after radiation sterilization can be sensitive to design and processing choices, the users should verify performance in their application. Our customers typically use this resin in radiation-sterilizable medical and laboratory devices. For regulatory compliance information see Pro-fax PF531 Product Stewardship Bulletin (PSB). Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.&&

About

Pro-fax PF531 radiation resistant, high melt flow, controlled rheology polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications and offers retention of physical properties and color after radiation sterilization and good processability. Pro-fax PF531 resists yellowing and embrittlement after gamma radiation. However, since performance and appearance after radiation sterilization can be sensitive to design and processing choices, the users should verify performance in their application. Our customers typically use this resin in radiation-sterilizable medical and laboratory devices. For regulatory compliance information see Pro-fax PF531 Product Stewardship Bulletin (PSB). Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,High liquidity,Gamma radiation,Good color stability,Radiation disinfection
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792-B
Melt Flow Rate
230℃，2.16kg	27	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	28.0	MPa	ASTM D638
Tensile strain
yield	15	%	ASTM D638
Bending modulus
1% secant	970	MPa	ASTM D790-A

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	32	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2.0 in/min
3. 0.051 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.