KMI PP KM-303IB

About
KM-303IB is a propylene-ethylene block copolymer designed for film applications. Well designed EP rubber and managing polymerization process to reduce contaminations gives KM-303IB an extremely low fish-eye level Food Contact Application: KM-303IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact. Characteristics: Low fish-eye High Stiffness: Down gauging possibility High Haze&&

About

KM-303IB is a propylene-ethylene block copolymer designed for film applications. Well designed EP rubber and managing polymerization process to reduce contaminations gives KM-303IB an extremely low fish-eye level Food Contact Application: KM-303IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact. Characteristics: Low fish-eye High Stiffness: Down gauging possibility High Haze&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Food contact compliance,Block Copolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	5.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	98	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	108	℃	ASTM D648

optical performance	Nominal value	Unit	Test method
gloss	10		ASTM D2457
Haze	65	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	78		ASTM D785
tensile strength
yield	28.4	MPa	ASTM D638
Tensile strain
fracture	> 500	%	ASTM D638
Bending modulus	1370	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.