Silplus® 50 MP

About
Silplus 50 MP is a heat cured elastomer with outstanding processing capability. Silplus 50 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring. Key Features and Benefits compounding simplicity good extrudability high mechanical properties good green strength easily blendable versatile Potential Applications Because of its outstanding properties, Silplus 50 MP heat cured elastomer is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.&&

About

Silplus 50 MP is a heat cured elastomer with outstanding processing capability. Silplus 50 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring. Key Features and Benefits compounding simplicity good extrudability high mechanical properties good green strength easily blendable versatile Potential Applications Because of its outstanding properties, Silplus 50 MP heat cured elastomer is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.&&

Product Description
Supplier	Momentive
Generic	硅橡胶,HTV
Material Status	Commercial: Active
Features	Excellent Processability,Good Green Strength,Baking
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Mooney viscosity
25℃	37	MU	DIN 53523

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	50		DIN 53505

elastic body	Nominal value	Unit	Test method
tensile strength	11.0	MPa	DIN 53504
Tensile strain
fracture	550	%	DIN 53504
tear strength	25.0	kN/m	ASTM D624
Compression deformation
175℃，22 hr	24	%	ISO 815

Supplementary information	Nominal value	Unit	Test method
Vulcanization（170℃）	10.0	min

Uncured Properties	Nominal value	Unit	Test method
Density	1.15	g/cm³	DIN 53479

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die B
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.