HTM® 515-1 - SOLIAO

About
HTM® 515-1 is a controlled flow, high temperature bismaleimide (BMI) resin tooling matrix system offering improved handling characteristics and after appropriate post-cure, thermal cycling capability up to 250°C (482°F). HTM 515-1 is supplied in a range of standard prepreg formats for the manufacture of high temperature composite tooling.&&

Product Description
Supplier	Cytec Industries
Generic	马来酸酐接枝共聚物
Material Status	Commercial: Active
Features	High Heat Resistance,High pressure heat resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³
Shrinkage rate	0.064	%

THERMAL	Nominal value	Unit	Test method
Linear coefficient of thermal expansion
MD	2.9E-6	1/℃

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.