| About |
|---|
| Vypet VNT 615 HP is a modified 15% fiberglass reinforced PET injection molding compound designed for automotive structural applications. Features Easy, fast processing Excellent strength and stiffness Excellent dimensional stability Typical Applications Automotive structural parts Automotive sun roof frames&& |
| Product Description | |
|---|---|
| Supplier | Lavergne |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good Dimensional Stability |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ASTM D792 |
| ash content | 15 | % | ASTM D2854 |
| Shrinkage rate | |||
| MD：2.0 mm | 1.1 | % | ASTM D995 |
| TD：2.0 mm | 0.6 | % | ASTM D995 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23℃，5 mm/min | 100 | MPa | ASTM D638 |
| bending strength | |||
| 1.30 mm/min，23℃ | 150 | MPa | ASTM D790 |
| Bending modulus | |||
| 1.30 mm/min，23℃ | 6000 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 200 | ℃ | ASTM D648 |
| Melting temperature | 275-290 | ℃ | |
| Vicat Softening Temp |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 50 | J/m | ASTM D256 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Injection temperature | |||
| Central temperature of the barrel | 265-275 | °C | |
| Barrel front temperature | 270-290 | °C | |
| Die temperature | 275-295 | °C | |
| Mold temperature | 95.0-120 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |