Purell RP378T - SOLIAO

About
Purell RP378T is a polypropylene random copolymer with nucleation and antielectrostatic agent. It exhibits a very good flowability and a good transparency. Purell RP378T is used for injection moulding medical and pharmaceutical applications only after approval by LyondellBasell. For regulatory information please refer to Purell RP378T Product Stewardship Bulletin (PSB). Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.&&

About

Purell RP378T is a polypropylene random copolymer with nucleation and antielectrostatic agent. It exhibits a very good flowability and a good transparency. Purell RP378T is used for injection moulding medical and pharmaceutical applications only after approval by LyondellBasell. For regulatory information please refer to Purell RP378T Product Stewardship Bulletin (PSB). Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Clarity,High liquidity,Nucleation,Random copolymer,Antistatic property,Ethylene oxide disinfection
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	48	g/10min	ISO 1133
Melt Volume Rate
230℃，2.16 kg	65.0	cm³/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179
0℃	2.5	kJ/m²	ISO 179
23℃	4.5	kJ/m²	ISO 179
Charpy Unnotch Impact strength			ISO 179
0℃	60	kJ/m²	ISO 179
23℃	180	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	70.0	℃	ASTM D648，ISO 75-2/B
Vicat Softening Temp
A50	130	℃	ISO 306/A50
B50	72.0	℃	ISO 306

optical performance	Nominal value	Unit	Test method
Haze
1000 µ m, injection molding	7.0	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Ball hardness
H358/30	58.0	MPa	ISO 2039-1
Tensile modulus	1150	MPa	ISO 527-2
tensile strength
yield	29.0	MPa	ISO 527-2
Tensile strain			ISO 527-2
yield	11	%	ISO 527-2
fracture	> 50	%	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.