| About |
|---|
| Mechanial Air Assist Spray applied Polyurethane Elastomer used on the outer surface of automotive interior trim applications. |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PUR |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.760 | g/cm³ | ISO 1183/A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Cold resistance | |||
| -40℃ | Pass | SAE J323 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Burning rate | 35 | mm/min | Internal Method |
| atomization | > 99.0 | SAE J1756 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 63 | ISO 868 | |
| tensile strength | |||
| — | 7.46 | MPa | |
| — | 5.90 | MPa | |
| — | 8.80 | MPa | |
| Tensile strain | |||
| fracture | 210 | % | |
| fracture | 270 | % | |
| fracture | 300 | % |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |