| About |
|---|
| Very High Viscosity, Improved Impact, Extrusion&& |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | High impact resistance,Ultra High Viscosity |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 23℃，50% RH | 0.30 | % | ISO 62 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 255 | ℃ | ISO 11357-3 |
| Vicat Softening Temp |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 100 -120 | °C | |
| Drying time | 3.0-12 | Hr | |
| Injection temperature | |||
| Rear barrel temperature | 270-280 | °C | |
| Central temperature of the barrel | 270-290 | °C | |
| Barrel front temperature | 270-290 | °C | |
| Die temperature | 270-290 | °C | |
| Mold temperature | 130-140 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |