Nucrel® 599 - SOLIAO

About
Nucrel® 599 is a copolymer of ethylene and methacrylic acid, made with nominally 10 wt% methacrylic acid. It is inherently flexible without the need for plasticizers. The resin can be pigmented, UV-stabilized for exterior applications and painted or plated for special decorative effects.&&

Product Description
Supplier	DOW
Generic	EMA
Material Status	Commercial: Active
Features	Weather resistance is good,Good flexibility,Sprayable,Electroplating
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.930	g/cm³	ASTM D792
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	450	g/10min	ASTM D1238
190℃，2.16kg	450	g/10min	ISO 1133
Methacrylic acid content	10.0	wt%
Methacrylic Acid Content	10.0	wt%

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	65.0	℃	ASTM D1525
Vicat Softening Temp	65.0	℃	ISO 306
Melting peak temperature	98.0	℃	ASTM D3418
Melting temperature
DSC	98.0	℃	ISO 3146
freezing point
—	69	℃	ISO 3146
—	69	℃	ASTM D3418

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	< 235	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.