| About |
|---|
| Product Description | |
|---|---|
| Supplier | DOMO |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | High impact resistance,Excellent Processability,low-temperature impact resistance,Grease resistance,Fuel resistance,Ultra high toughness,High Viscosity |
| Availabilitys | Europe,Africa & Middle East |
| Technical Data |
|---|
| Process Conditions | |||
|---|---|---|---|
| extrusion | Nominal value | Unit | Test method |
| drying temperature | 80.0 | °C | |
| Drying time | 8.0 | hr | |
| Recommended maximum moisture content | 0.080 | % | |
| Temperature of material cylinder zone 1 | 200 to 220 | °C | |
| Temperature of material cylinder zone 3 | 210 to 230 | °C | |
| Joint temperature | 210 to 230 | °C | |
| Mouth temperature | 215 to 230 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |