3M™ Dyneon™ TFM™ Modified PTFE Compound TFM 6221

About
3M™ Dyneon™ TFM™ Modified PTFE Compound TFM 6221 is a free-flowing compound based on modified suspension PTFE of the 2nd generation containing conductive, FDA*-approved fillers for compression and automatic moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction & wear Good chemical stability High limiting oxygen index (LOI) Low friction behaviour Very good mechanical properties Exceptional temperature resistance FDA-approved filler&&

About

3M™ Dyneon™ TFM™ Modified PTFE Compound TFM 6221 is a free-flowing compound based on modified suspension PTFE of the 2nd generation containing conductive, FDA*-approved fillers for compression and automatic moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction & wear Good chemical stability High limiting oxygen index (LOI) Low friction behaviour Very good mechanical properties Exceptional temperature resistance FDA-approved filler&&

Product Description
Generic	PTFE
Material Status	Commercial: Active
Features	Good liquidity,Low coefficient of friction,Welding
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.15	g/cm³	ASTM D4745-06
Apparent density	0.65	g/cm³	ASTM D4894
Shrinkage rate
MD	4.6	%	ASTM D4894-07

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	< 1.0E+4	ohms·cm	IEC 60093

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	66		DIN 53505
tensile strength	30.0	MPa	ASTM D4745-06
Tensile strain
fracture	390	%	ASTM D4745-06

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.