| About |
|---|
| IXAN® PVS 119 is a PVDC resin-based blend for the extrusion and coextrusion of barrier films mainly used in flexible food packaging and medical packaging applications (heat shrinkable or not). It is recommended for applications requiring very good oxygen and water vapor barrier. Ixan® PVS 119 is a copolymer of vinylidene chloride and methyl acrylate supplied as an off-white, free-flowing powder.&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PVDC |
| Material Status | Commercial: Active |
| Features | Low odor,Moisture resistance |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| film | Nominal value | Unit | Test method |
| Oxygen transfer rate | |||
| 23℃，85% RH，10 µm | 7.0 | cm³/m²/bar/24 hr | |
| Water vapor transmittance | |||
| 38℃，90% RH，10 µm | 2.00 | g/m²/bar/24 hr | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 158 | ℃ |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.70 | g/cm³ | |
| Apparent density | 0.80 | g/cm³ | |
| Particle size | |||
| Average Diameter | 220 | µm | |
| bulk density | 1700 | g/l | |
| Apparent viscosity of melt- | |||
| 160℃，100 s-1 | 1400 | Pa·s |
| Notes |
|---|
| 1. Please contact your Account Manager to request an EU food contact and/or FDA letter which provides the specifications for compliance with these regulations. |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. Cast film extruded (EVA/PVDC/EVA) — film conditioned two days at 40°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |