| About |
|---|
| Starex VE-1801 is a High Impact Polystyrene product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Flame Retardant&& |
| Product Description | |
|---|---|
| Supplier | SAMSUNG |
| Generic | PS (HIPS) |
| Material Status | Commercial: Active |
| Features | Flame Characteristics |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.23 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23℃ | 23 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 37 | % | ISO 527-2 |
| Tensile modulus | |||
| 23℃ | 2000 | MPa | ISO 527-2 |
| bending strength | |||
| 23℃ | 43 | MPa | ISO 178 |
| Bending modulus | |||
| 23℃ | 1900 | MPa | ISO 178 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, annealed | 85 | ℃ | ISO 75-2/B |
| 0.45 MPa, unannealed | 81 | ℃ | ISO 75-2/Bf |
| 1.8 MPa, annealed | 80 | ℃ | ISO 75-2/A |
| 1.8 MPa, annealed | 71 | ℃ | ISO 75-2/Af |
| Vicat Softening Temp | |||
| B50 | 85 | ℃ | ISO 306 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50mm | V-1 | UL 94 | |
| 2.00mm | V-0 | UL 94 | |
| 3.00mm | V-0 | UL 94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 14 | kJ/m² | ISO 179/1eA |
| Impact strength of cantilever beam notch | |||
| 23℃ | 14 | kJ/m² | ISO 180-1A |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 2 | Hr | |
| Water content | 0.020 | % | |
| Injection temperature | |||
| Rear barrel temperature | 190-200 | °C | |
| Central temperature of the barrel | 200-210 | °C | |
| Barrel front temperature | 210-220 | °C | |
| Die temperature | 220 | °C | |
| Mold temperature | 40-60 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.79 in/min |
| 3. 0.11 in/min |
| 4. 0.079 in/min |
| 5. Thickness: 4mm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |