| About |
|---|
| Kepamid® 1340M3是一种聚酰胺6（尼龙6）材料,含有的填充物为40% 矿物填料。 该产品在亚太地区、北美洲或欧洲有供货,。 Kepamid® 1340M3的主要特性有: 阻燃/额定火焰 良好的尺寸稳定性 典型应用领域包括: 房屋 生活消费品 电气/电子应用&& |
| Product Description | |
|---|---|
| Supplier | Korea Engineering |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Good liquidity,HB |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.47 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 235℃，2.16kg | 25 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 49 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 220 | ℃ | DSC |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 0.80 mm | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 119 | ASTM D785 | |
| tensile strength | |||
| Yield, 23 ℃ | 78.5 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 7.0 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 5880 | MPa | ASTM D790 |
| bending strength | |||
| Yield, 23 ℃ | 137 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |