| About |
|---|
| 刚性高，流动性高，粘度中等，透明，汽车部件，电子电器，工业应用，工业机械。特性：刚性改良。 |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High liquidity,Medium Viscosity |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Shrinkage rate | |||
| MD | 1.2 | % | ISO 294-4 |
| TD | 1.3 | % | ISO 294-4 |
| Density | 1.13 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 230℃，2.16 kg | 56 | cm³/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | 100 | % | ASTM D638 |
| Rockwell hardness | 120 | ASTM D785 | |
| bending strength | 105 | MPa | ASTM D790 |
| tensile strength | 80 | MPa | ASTM D638 |
| Dielectric strength | |||
| 3.2 mm | 20 | KV/mm | ASTM D149 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 10^15 | ohms·cm | ASTM D257 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | V-2 | UL 94 | |
| Hot deformation temperature | |||
| 0.45 MPa | 160 | ℃ | ASTM D648 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | 0.04 | kJ/m² | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |