| About |
|---|
| RANPELEN SFI-841A是一种无规三元共聚聚丙烯，适用于IOPP薄膜和BOPP产品。 它具有高透明度和光泽度，宽热粘性范围和极低的密封起始温度。 它含有抗粘连添加剂。 |
| Product Description | |
|---|---|
| Supplier | LOTTE |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good surface appearance,Thermal viscosity |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.90 | g/cm³ | ASTM D792 |
| Melt index | 5.5 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 130 | ℃ | LOTTE’S |
| Vicat Softening Temp | 114 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 19.6 | Mpa | ASTM D638 |
| Tensile strain | |||
| fracture | >500 | % | ASTM D638 |
| Bending modulus | 666.4 | Mpa | ASTM D790 |
| Haze | <2.0 | % | ASTM D1003 |
| Heat sealing temperature | 118 | ℃ | LOTTE’S |
| Starting temperature of heat sealing | 105 | ℃ | LOTTE’S |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |