| About |
|---|
| Characteristics: Transparency FDA DMF 21499 USP Class VI SFDA Applications: IV bottle&& |
| Product Description | |
|---|---|
| Supplier | Hyosung |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Homopolymer |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 6.0 | g/10min | ASTM D1238 |
| Density | 0.900 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | 932 | MPa | ASTM D790 |
| tensile strength | |||
| yield | 27.5 | MPa | ASTM D638 |
| Rockwell hardness | |||
| R | 85 | R | ASTM D-785 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 59 | J/m | ASTM D256 |
| Process Conditions | |||
|---|---|---|---|
| Nominal value | Unit | Test method | |
| drying temperature | 80 to 100 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |