Iupilon® GSH2030R2

About
Iupilon® GSH2030R2 is a Polycarbonate (PC) material filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of Iupilon® GSH2030R2: Flame Rated.&&

Product Description
SupplierMitsubishi
GenericPolycarbonate
Material StatusCommercial: Active
FeaturesHB
AvailabilitysNorth America,Asia Pacific,Europe
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Density1.43g/cm³ISO 1183
Melt Flow Rate
300℃,1.20kg5.7g/10minISO 1133
Melt Volume Rate
300℃,1.2 kg4.80cm³/10minISO 1133
Shrinkage rate 
TD:3.2 mm0.25 to 0.45%
MD:3.2 mm0.050 to 0.25%
Water absorption rate
Saturation, 23 ℃0.090%

MECHANICALNominal valueUnitTest method
Tensile modulus8900MPaISO 527-2
tensile strength
fracture120MPaISO 527-2
Tensile strain
fracture2.5%ISO 527-2
Bending modulus8500MPaISO 178
bending strength180MPaISO 178

IMPACTNominal valueUnitTest method
Charpy Notched Impact Strength
23℃15kJ/m²ISO 179
Charpy Unnotch Impact strength
23℃50kJ/m²ISO 179

THERMALNominal valueUnitTest method
Hot deformation temperature
1.8 MPa, unannealed144ISO 75-2/A
0.45 MPa, unannealed148ISO 75-2/B
Linear coefficient of thermal expansion
TD6.3E-51/℃ISO 11359-2
MD1.8E-51/℃ISO 11359-2

Electrical performanceNominal valueUnitTest method
Surface resistivity2.0E+15ohmsIEC 60093
Volume resistivity2.0E+16ohms·cmIEC 60093
Dielectric strength IEC 60243-1
1 mm32kV/mmIEC 60243-1
3 mm20kV/mmIEC 60243-1
Relative permittivity IEC 60250
100 Hz3.60 IEC 60250
1 MHz3.50 IEC 60250
Dissipation factor IEC 60250
100 Hz1.1E-3 IEC 60250
1 MHz8.4E-3 IEC 60250
Compared to the leakage tracing indexPLC 4 UL 746

FLAME CHARACTERISTICSNominal valueUnitTest method
0.40 mmHB UL 94

Process Conditions
injectionNominal valueUnitTest method
Barrel rear temperature270 to 290°C
Barrel middle temperature280 to 300°C
Barrel front temperature290 to 310°C
Nozzle temperature290 to 310°C
Mold temperature80 to 120°C
Injection pressure50.0 to 150MPa
Screw speed50 to 100rpm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.