Lupoy® GN5301F

About
Lupoy® GN5301F is a Polycarbonate + ABS (PC+ABS) material. It is available in Asia Pacific, Europe, Latin America, or North America. Primary attribute of Lupoy® GN5301F: Flame Rated.&&

Product Description
Supplier	LG Chemical
Generic	PC+ABS
Material Status	Commercial: Active
Features	V-0
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.43	g/cm³	ASTM D792
Melt Flow Rate
250℃，2.16kg	4.5	g/10min	ASTM D1238
Shrinkage rate
MD	0.10 to 0.30	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	83	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, annealed, 5.08 mm	104	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	118	MPa	ASTM D638
Tensile strain
fracture	7.0	%	ASTM D638
Bending modulus	7540	MPa	ASTM D790
bending strength	168	MPa	ASTM D790
Rockwell hardness
R-level	122		ASTM D785

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.