Ensinger PVC - SOLIAO

About
Ensinger’s type 1 grey PVC ROD is designed for machining solutions ans is a cost effective solution for general industrial applications. The material offers an excellent combination of chemical resistance and mechanical strength, along with good thermal and electrical properties that are suited to a variety of industries. Manufactured in rod, Ensinger PVC can be used for applications such as pump housings, valve components, and other parts as well as couplings in electronics applications that require good chemical resistance. Excellent chemical and corrosion resistance Very good mechanical strength Non-contamination for application requiring high levels of material purity Excellent flammability characteristics&&

About

Ensinger’s type 1 grey PVC ROD is designed for machining solutions ans is a cost effective solution for general industrial applications. The material offers an excellent combination of chemical resistance and mechanical strength, along with good thermal and electrical properties that are suited to a variety of industries. Manufactured in rod, Ensinger PVC can be used for applications such as pump housings, valve components, and other parts as well as couplings in electronics applications that require good chemical resistance. Excellent chemical and corrosion resistance Very good mechanical strength Non-contamination for application requiring high levels of material purity Excellent flammability characteristics&&

Product Description
Supplier	Ensinger
Generic	PVC, not specified
Material Status	Commercial: Active
Features	Good Rigidity,Good Electrical Properties,Corrosion Resistant,Flame Characteristics,Solvent resistance,V-0
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.38	g/cm³	ASTM D792
Water absorption rate
23℃，24hr	0.020	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2830	MPa	ASTM D638
tensile strength
Yield, 23 ℃	50.3	MPa	ASTM D638
Bending modulus	2900	MPa	ASTM D790
bending strength	103	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	48	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed	70.0	℃	ASTM D648
Linear coefficient of thermal expansion
MD	5.2E-5	1/℃	ASTM D696
Maximum operating temperature	60	℃

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.