| About |
|---|
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Generic | TPU |
| Material Status | Commercial: Negative |
| Features | High elastic,Quick molding cycle,Aliphatic series,Low density |
| Availabilitys | North America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.12 | g/cm³ | DIN 53.479 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 112 | kN/m | DIN 53.515 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 88 | DIN 53.505 | |
| tensile strength | |||
| — | 28 | MPa | DIN 53.504 |
| 100% strain | 7.3 | MPa | DIN 53.504 |
| 300% strain | 13.0 | MPa | DIN 53.504 |
| Tensile strain | |||
| fracture | 570 | % | DIN 53.504 |
| abrasion | 49 | mm³ | DIN 53.516 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |