| About |
|---|
| ICORENE® 6007 OSF is a linear low density polyethylene especially formulated with a foaming agent suitable for rotomoulding. This grade has been developed for the foam filling of structural rotational mouldings. ICORENE® 6007 OSF is intended to be used with an appropriate ICORENE® skin powder material in a one shot moulding process.&& |
| Product Description | |
|---|---|
| Generic | 泡沫 |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.936 | g/cm³ | Internal Method |
| Apparent density | 0.12 to 0.18 | g/cm³ | Internal Method |
| Melt Flow Rate | 6.0 | g/10min | ASTM D1238 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Expanded |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |